The Alpha Heart Rate Monitor watch from MIO Global is the world’s first performance level, strapless, continuous heart rate monitor you can wear on your wrist. Alpha uses ANT+ or Bluetooth Smart technology to transmit your heart rate data to smartphones and other compatible devices. It has been tested EKG-accurate even while you are running at performance speeds of up to 20km/h (12mph)!
Before Alpha (and others like Basis), the most common way to get an accurate heart rate continuously while exercising was to wear a strap around your chest. With Alpha's innovative technology, the world of heart rate monitoring will be changed forever!
How does the Alpha work?
Two light beams and an electro-optical cell "sense" the volume of blood under your skin. Because the blood volume pulsates in the rhythm of the heart, so does the signal from the electro-optical cell. This signal is processed by an advanced electronics circuit and passed on to a highly specialized computer program that is embedded in the Alpha. To date, the stumbling block with this type of technology has been the arm movements while walking or running strongly interfere with the electro-optical signal to the point that it is no longer possible to extract the heart rate from it.
In order to solve this problem the Alpha has been provided with a separate motion detector. The computer program is able to use the information from this detector to compensate for the disturbance that is generated in the electro-optical signal by walking or running motions. As a result, the Alpha can display an accurate heart rate even during motion-intense activities.
The Alpha watch singular purpose is to measure and display your heart rate continuously without having to wear a chest strap. The instruction for wearing your Alpha from MIO Global are very specific:
- Fasten the watch snugly so the optical sensor on the back of the watch makes good contact with your skin
- Wear the watch above - not on - your wrist bone; wear it higher on the forearm if you have a small wrist
- If you often have cold hands or poor circulation, your Alpha’s performance may be diminished. Try exercising for a few minutes to increase your blood flow before turning on the heart rate monitor
To get your heart rate reading, you simply:
- Press and hold the HR button until the watch beeps and the display says FIND.
- Hold your arm fairly still until the watch beeps again and displays your heart rate.
- It takes a few seconds for your heart rate to register.
- If you see '--' , the heart rate signal is not strong enough. Press the HR button to QUIT or END and try again.
If you still cannot get a reading, try these:
- Tighten the watch strap.
- Try wearing the Alpha on your other wrist.
- Minimize wrist movement while using Alpha's continuous heart rate.
You can also set the low and high numbers for your target heart rate zone. The Alpha watch can notify you by beeping once when you are not exercising in your target heart rate zone. A double-beep indicates your heart rate is 10 BPM or more outside the target zone.
How does the Alpha function in normal usage?
With your Alpha in EXERCISE mode and the TIMER on, the LED light below the watch displays alerts.
- Green flash: you are exercising in your target heart rate zone.
- Red flash: you are exercising above your upper limit. A red double-flash means your heart rate is 10 BPM or more above the target zone.
- Blue flash: you are exercising below your lower limit. A blue double-flash means your heart rate is 10 BPM or more below the target zone.
Without any other apps, the only thing you can do with your Alpha watch is to review your exercise session. The Alpha exercise log shows:
- The length of time of your last exercise session (assuming that the timer was running for your entire session).
- Your average heart rate during the last exercise session.
- The amount of time you spent in your target heart rate zone in the last exercise session.
Since it does not store the complete data other than your current session, Alpha works with third-party apps (MIO Global is developing their own iOS and Android app) including Wahoo Fitness, Run Keeper, Map My Run, and Adidas miCoach. To find out which apps work with the Alpha, check out the full list here.
The Alpha starts transmitting your heart rate data as soon as it finds your heart rate thus becoming discoverable to your devices. Note to wear the receiving device on your arm, in your front pocket, or in front of you on a belt or bike handlebar. Do not position the device behind you (e.g. in a back pocket or backpack).
The display works real well in daylight but you may have a hard time reading it at night (I'm thinking of senior citizens who may be wearing the Alpha watch). The included charger interface to a USB plug only. The USB dongle plugs into the USB port of your computer whereas the 4 connection pads on the back of your Alpha connects to the 4 connection pads on the dongle. The magnets in the connection pads will help the two pieces lock into place. It would be nice if they have included an adapter for charging via the AC outlet like those that come standard with the iPhone and Motorola ACTV.
As for the battery life, there is nothing out there that can take heart rate readings 24/7 with a single charge that lasts for hours. From Alpha's specifications, the length of time you can use the heart rate monitor while in EXERCISE mode varies from 8 to 10 hours.
One thing that I really liked about the MIO Alpha, the watch strap. It is one of the most comfortable and well-designed strap made of soft silicone with a secure snap latching system. The MIO Alpha heart rate monitor watch is water resistant and great for its singular purpose. Simple to use and easy to read.